Will replacing this IC bring Face ID back?

Only if the fault is on the board. Face ID that failed after liquid damage or a board repair is often board-side. Face ID that failed on a phone with a replaced sensor assembly usually means the factory-paired dot projector, which no IC replaces.

Does this need soldering?

Yes — it is surface mount. Fitting it means hot air, clean level pads, careful alignment and a controlled reflow under magnification.

What should I check before replacing it?

Current draw on a bench supply and diode-mode readings around the chip. Replacing an IC on suspicion alone is expensive guesswork and it risks the pads underneath.

DEEPFIXQuality you love

Luban Face ID IC 15 for iPhone 15 Face Recognition Repair & Motherboard Repair

Name: Luban Face ID IC 15 for iPhone 15 Face Recognition Repair & Motherboard Repair
Brand: Luban
SKU: DFX-15-FID
Price: 5000 PKR
Availability: InStock

No reviews

A Luban Face ID IC for the iPhone 15, used in board-level Face ID and motherboard repair.

Rs 5,000

A Luban Face ID IC for the iPhone 15, used in board-level Face ID and motherboard repair. This is a surface-mount chip, not a plug-in flex: fitting it means…

In stock — ships within 24 hours

Quantity

Not sure it fits your repair? Ask a technician

Nationwide delivery
Same-day dispatch from Peshawar before 4 PM
Authentic parts
100% genuine, sourced from manufacturers
7-day returns
No-questions return on most items

A Luban Face ID IC for the iPhone 15, used in board-level Face ID and motherboard repair.

This is a surface-mount chip, not a plug-in flex: fitting it means lifting the original with hot air, cleaning and levelling the pads, aligning the replacement and reflowing it under magnification.

What it cannot do is replace paired hardware. The dot projector is matched to the phone at the factory, so if that module is damaged or was swapped, no board-level repair restores Face ID.

Key features

Face ID IC for the iPhone 15
Surface-mount chip — requires hot air and micro-soldering
For board-side Face ID faults, not a damaged dot projector
Diagnose before fitting — replacing an IC on suspicion risks the pads

What this is used for

Board-level Face ID repair
Motherboard repair after liquid damage
Replacing an IC identified by diagnosis

Who it's for

Micro-soldering technicians doing board-level Face ID repair.

Where it fits in the repair

Confirm the fault is board-side with diode-mode readings and current draw, flood the area with flux, lift the old IC with hot air, wick and level the pads, align the replacement and reflow. Test before reassembly.

Manufacturer description

A Luban Face ID IC for the iPhone 15, used in board-level Face ID and motherboard repair. This is a surface-mount chip, not a plug-in flex: fitting it means lifting the original with hot air, cleaning and levelling the pads, aligning the replacement and reflowing it under magnification. What it cannot do is replace paired hardware. The dot projector is matched to the phone at the factory, so if that module is damaged or was swapped, no board-level repair restores Face ID. • Face ID IC for the iPhone 15 • Surface-mount chip — requires hot air and micro-soldering • For board-side Face ID faults, not a damaged dot projector • Diagnose before fitting — replacing an IC on suspicion risks the pads Compatible with: iPhone 15.